Helical Coolant-Hole Rods

Helical Coolant-Hole Rods

Cemented Tungsten Carbide Rod Blanks for Cutting Tool Manufacturers

Cemented Tungsten Carbide Rod Blanks for Cutting Tool Manufacturers

KENIN supplies helical coolant-hole rods for cutting-tool manufacturers and industrial buyers sourcing cemented carbide blanks. This category brings together the configurations shown in the KENIN 2026 rod catalog. Product selection should be based on the actual blank geometry, supply condition, dimensional requirements and intended tool design.

Explore the product series below. Each detail page should be treated as the source for its own catalog dimensions and tolerance notes; values must not be transferred between product families.

Helical Coolant-Hole Rods Products

Product Selection: What to Compare

When comparing helical coolant-hole rods, start with the finished tool design and work backward to the blank specification. Confirm:

  • Nominal blank or ground outside diameter and its stated tolerance.
  • Overall rod length and applicable length tolerance.
  • Internal coolant-hole or external profile geometry, where applicable.
  • Surface and supply condition: sintered/unground, rough-ground or precision-ground, as identified for the product.
  • Chamfer, groove, slot, step or taper details shown on the drawing.
  • Required carbide grade and the intended workpiece/tool application.

Technical Specification Guidance

KENIN's 2026 catalog provides product-specific tables. The applicable fields depend on the configuration:

  • Twin helical: blank D, D tolerance, L, hole diameter d, TK, helix angle, pitch P, pitch limits and eccentricity es.
  • Triple helical: the above fields plus indexing deviation α.
  • Micro-diameter and deep-hole configurations: use the dedicated table for the exact combination of D, d, TK, angle, pitch, length and tolerance.

The catalog includes 30° and 40° principal families, alternative twin-helix angles, micro-diameter configurations and longer blanks for deep-hole drills. Do not infer a continuous angle or size range from the listed examples.

Carbide Grade Selection

Grade choice depends on tool type, workpiece material, cutting conditions and the required balance of hardness, wear resistance and toughness. The 2026 rod catalog includes grade references and application recommendations. Do not assume every grade is available for every diameter or geometry.

KENIN Carbide Grades

Typical Applications

This product family is intended for use as a semi-finished carbide blank in the tool designs represented by the catalog. Suitability depends on the final geometry, material grade and machining conditions. Ask the KENIN team to review the intended tool and drawing.

Customization & Technical Review

For a non-standard size or geometry, send:

  1. Product type or drawing number.
  2. Blank/finished diameter and overall length.
  3. Relevant geometry: hole count, d, TK, helix angle, pitch, slot, groove, taper or step.
  4. Tolerance and finishing condition.
  5. Grade or intended tool/workpiece material.
  6. Quantity and destination country.

All non-standard dimensions and special features are subject to drawing review and manufacturing feasibility confirmation.

State the required supply condition, surface requirements, desired delivery date and inspection method. Availability and delivery are confirmed in the quotation.

Related Resources

Frequently Asked Questions

How do I choose twin or triple helical channels?
Use the coolant-channel arrangement required by the finished tool. Triple-hole designs also require review of the hole indexing.
Does helix angle alone determine the order specification?
No. Provide hole diameter, TK, pitch and rod dimensions with the angle, and confirm the exact catalog combination.
Are alternative helix angles a continuous standard range?
No. The catalog provides discrete configurations; unlisted combinations require technical review.
What additional information is needed for long or micro-diameter rods?
Long rods require defined straightness and inspection conditions. Micro-diameter rods need a detailed cross-section and remaining-web review.
How are flagged pitch values handled?
Entries flagged on the product page remain as printed in the catalog until the factory confirms them. Do not use an unresolved entry as an approved inspection criterion.

Request a Quote

Send KENIN your drawing, catalog reference or dimensional requirements. Our team can review the selected configuration and confirm the applicable material, dimensions, finishing condition and quotation details.

Request a Quote Send Your Drawing