30° Twin Helical Coolant-Hole Rods
Two helical coolant channels in the catalog's 30° configuration.
View Details
Three helical coolant channels arranged around the rod cross-section in the catalog's 30° configuration.
Three helical coolant channels arranged around the rod cross-section in the catalog's 30° configuration.
For cutting-tool designs specifying three helical coolant passages. The three-channel layout requires attention to channel indexing as well as hole size and pitch.
For this helical configuration, specify channel count, hole diameter d, TK, helix angle, pitch P and pitch tolerance. Three-channel designs also require review of indexing deviation α. Do not infer the pitch from the helix angle without confirming the catalog definition and the selected diameter.
The 2026 KENIN catalog provides the following specification fields for this product:
Blank D, D tolerance, L, hole d, d tolerance, TK, TK tolerance, pitch P and pitch limits, eccentricity es and indexing deviation α. Catalog includes α deviation reference ±4° for the listed series.
Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.
★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.
| Blank D | D tol. | L (mm) | Hole d | d tol. | TK | TK tol. | Pitch P | P lower | P upper | Offset es | Dev. α | Stock |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6.3 | +0.3~+0.6 | 330 | 0.50 | ±0.10 | 2.75 | ±0.15 | 32.65 | -0.65 | +0.67 | 0.15 | ±4° | ★ |
| 6.3 | +0.3~+0.6 | 330 | 0.70 | ±0.10 | 2.55 | ±0.15 | 32.65 | -0.65 | +0.67 | 0.15 | ±4° | ★ |
| 8.3 | +0.4~+0.7 | 330 | 0.70 | ±0.10 | 3.85 | ±0.15 | 43.53 | -0.86 | +0.89 | 0.15 | ±4° | ★ |
| 9.3 | +0.4~+1.0 | 330 | 0.85 | ±0.15 | 4.95 | ±0.15 | 48.97 | -0.97 | +1.00 | 0.20 | ±4° | ★ |
| 10.3 | +0.4~+1.0 | 330 | 0.85 | ±0.15 | 4.95 | ±0.15 | 54.41 | -1.08 | +1.11 | 0.20 | ±4° | ★ |
| 12.3 | +0.4~+1.0 | 330 | 1.10 | ±0.15 | 6.05 | ±0.25 | 65.30 | -1.30 | +1.34 | 0.30 | ±4° | ★ |
| 14.3 | +0.4~+1.0 | 330 | 1.40 | ±0.20 | 7.05 | ±0.25 | 76.18 | -1.51 | +1.56 | 0.37 | ±4° | ★ |
| 16.3 | +0.5~+1.1 | 330 | 1.60 | ±0.20 | 8.05 | ±0.25 | 87.06 | -1.73 | +1.78 | 0.40 | ±4° | ★ |
| 18.3 | +0.6~+1.2 | 330 | 1.70 | ±0.20 | 9.25 | ±0.25 | 97.95 | -1.94 | +2.00 | 0.50 | ±4° | ★ |
| 20.3 | +0.6~+1.2 | 330 | 1.90 | ±0.20 | 9.95 | ±0.25 | 108.83 | -2.16 | +2.23 | 0.50 | ±4° | ★ |
| 20.3 | +0.6~+1.2 | 330 | 2.00 | ±0.20 | 9.50 | ±0.50 | 108.83 | -2.16 | +2.23 | 0.50 | ±4° | ★ |
| 22.3 | +0.7~+1.3 | 330 | 2.00 | ±0.20 | 11.15 | ±0.35 | 119.71 | -2.38 | +2.45 | 0.50 | ±4° | ★ |
| 23.3 | +0.7~+1.3 | 330 | 2.00 | ±0.20 | 11.45 | ±0.35 | 125.15 | -2.45 | +2.56 | 0.50 | ±4° | ★ |
| 25.3 | +0.7~+1.3 | 330 | 2.00 | ±0.20 | 12.15 | ±0.35 | 136.03 | -2.70 | +2.78 | 0.50 | ±4° | ★ |
| 26.3 | +0.7~+1.3 | 330 | 2.00 | ±0.20 | 12.75 | ±0.35 | 141.48 | -2.81 | +2.90 | 0.50 | ±4° | ★ |
| 28.3 | +0.7~+1.3 | 330 | 2.50 | ±0.25 | 13.65 | ±0.45 | 152.36 | -3.02 | +3.12 | 0.60 | ±4° | ★ |
| 30.3 | +0.7~+1.3 | 330 | 2.50 | ±0.25 | 14.50 | ±0.60 | 163.24 | -3.24 | +3.34 | 0.60 | ±4° | ★ |
| 32.3 | +0.7~+1.3 | 330 | 3.00 | ±0.30 | 15.50 | ±0.60 | 174.12 | -3.46 | +3.56 | 0.60 | ±4° | ★ |
| Length L (mm) | Tolerance (mm) |
|---|---|
| <150 | +0.5/+1.0 |
| 150≤L≤300 | +1.0/+2.0 |
| >300 | +2.0/+5.0 |
Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.
For cutting-tool designs specifying three helical coolant passages. The three-channel layout requires attention to channel indexing as well as hole size and pitch.
This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.
For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:
Non-standard requests are subject to technical review and manufacturing feasibility confirmation.
Provide cross-section with three hole centers, D, L, d, TK, helix angle, pitch, indexing requirement and tolerances.
Please also include:
Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.
Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.