40° Triple Helical Coolant-Hole Rods
Three helical coolant passages in the catalog's 40° configuration.
View Details
Long helical coolant-hole carbide blanks cataloged for deep-hole drill production.
Long helical coolant-hole carbide blanks cataloged for deep-hole drill production.
For manufacturing long-reach and deep-hole drilling tools. Long blanks require careful review of straightness, coolant-channel geometry and the tool maker's finishing process.
For this helical configuration, specify channel count, hole diameter d, TK, helix angle, pitch P and pitch tolerance. Three-channel designs also require review of indexing deviation α. Do not infer the pitch from the helix angle without confirming the catalog definition and the selected diameter.
The 2026 KENIN catalog provides the following specification fields for this product:
Blank D, D tolerance, long blank length L, hole d, d tolerance, TK, TK tolerance, helix angle, pitch P and pitch limits, eccentricity es and straightness. Catalog includes lengths of 430 mm and 530 mm for listed configurations; verify each diameter/length combination in the table.
Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.
★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.
| Blank D | D tol. | L (mm) | Hole d | d tol. | TK | TK tol. | Helix angle | Pitch P | P lower | P upper | Offset es | Stock |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6.3 | +0.3~+0.6 | 430.0 | 0.70 | ±0.15 | 2.40 | ±0.20 | 30 | 32.65 | -0.65 | +0.67 | 0.15 | ★ |
| 7.3 | +0.3~+0.6 | 430.0 | 1.00 | ±0.15 | 3.50 | ±0.20 | 30 | 38.09 | -0.76 | +0.78 | 0.15 | ★ |
| 8.3 | +0.4~+0.7 | 530.0 | 1.00 | ±0.15 | 3.80 | ±0.20 | 30 | 43.53 | -0.86 | +0.89 | 0.20 | ★ |
| 9.3 | +0.4~+1.0 | 530.0 | 1.40 | ±0.15 | 4.50 | ±0.30 | 30 | 48.97 | -0.97 | +1.00 | 0.20 | ★ |
| 10.3 | +0.4~+1.0 | 530.0 | 1.40 | ±0.15 | 4.50 | ±0.30 | 30 | 54.41 | -1.08 | +1.11 | 0.20 | ★ |
| 11.3 | +0.4~+1.0 | 530.0 | 1.40 | ±0.15 | 4.90 | ±0.40 | 30 | 59.86 | 1.19 | +1.22 | 0.28 | ★ |
| 12.3 | +0.4~+1.0 | 530.0 | 1.40 | ±0.15 | 5.85 | ±0.40 | 30 | 65.30 | -1.30 | +1.34 | 0.30 | ★ |
| 13.3 | +0.4~+1.0 | 530.0 | 1.75 | ±0.20 | 6.10 | ±0.40 | 30 | 70.74 | -1.40 | +1.45 | 0.34 | ★ |
| 14.3 | +0.4~+1.0 | 530.0 | 1.75 | ±0.20 | 6.70 | ±0.40 | 30 | 76.18 | -1.51 | +1.56 | 0.37 | ★ |
| 16.3 | +0.5~+1.1 | 530.0 | 1.75 | ±0.20 | 7.90 | ±0.40 | 30 | 87.06 | -1.73 | 1.78 | 0.40 | ★ |
| 18.3 | +0.6~+1.2 | 530.0 | 2.00 | ±0.25 | 9.15 | ±0.40 | 30 | 97.95 | -1.94 | +2.00 | 0.50 | ★ |
| 20.3 | +0.6~+1.2 | 530.0 | 2.00 | ±0.25 | 9.90 | ±0.50 | 30 | 108.83 | -2.16 | +2.23 | 0.50 | ★ |
| 25.3 | +0.7~+1.3 | 530.0 | 2.00 | ±0.25 | 12.80 | ±0.50 | 30 | 136.03 | -2.70 | +2.78 | 0.50 | ★ |
Technical confirmation required: the D 11.3 row lists P lower as 1.19 without a minus sign, and the D 16.3 row lists P upper as 1.78 without a plus sign. These entries are retained exactly as supplied.
Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.
For manufacturing long-reach and deep-hole drilling tools. Long blanks require careful review of straightness, coolant-channel geometry and the tool maker's finishing process.
This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.
For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:
Non-standard requests are subject to technical review and manufacturing feasibility confirmation.
Provide tool length, blank length, D, d, TK, helix angle, pitch, straightness requirement and drawing.
Please also include:
Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.
Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.