40° Triple Helical Coolant-Hole Rods

Helical Coolant-Hole Rods

40° Triple Helical Coolant-Hole Rods

Three helical coolant passages in the catalog's 40° configuration.

Product Overview

Three helical coolant passages in the catalog's 40° configuration.

Configuration & Design Characteristics

For specialized tool geometries requiring three 40° helical coolant channels. Confirm the channel layout against the final tool design.

For this helical configuration, specify channel count, hole diameter d, TK, helix angle, pitch P and pitch tolerance. Three-channel designs also require review of indexing deviation α. Do not infer the pitch from the helix angle without confirming the catalog definition and the selected diameter.

Technical Specifications

The 2026 KENIN catalog provides the following specification fields for this product:

Blank D, D tolerance, L, hole d, d tolerance, TK, TK tolerance, pitch P and limits, eccentricity es and indexing deviation α. The catalog marks some larger configurations as made to order; confirm availability in the quotation.

Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.

★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.

40° Triple Helical Coolant-Hole Rods — 40° triple helical dimensions · 2026 catalog
Blank DD tol.L (mm)Hole dd tol.TKTK tol.Pitch PP lowerP upperOffset esDev. αStock
6.4+0.4~+1.03300.50±0.102.20±0.1022.46-0.39+0.400.15±4°★
8.4+0.4~+1.03300.65±0.102.60±0.1529.95-0.53+0.540.15±4°★
10.4+0.4~+1.03300.80±0.153.35±0.1537.44-0.66+0.670.20±4°★
12.4+0.4~+1.03300.90±0.154.00±0.2044.93-0.79+0.800.30±4°★
14.4+0.5~+1.13301.00±0.154.50±0.2052.42-0.92+0.940.37±4°★
16.4+0.5~+1.13301.20±0.155.30±0.2059.90-1.05+1.070.40±4°★
18.4+0.5~+1.13301.40±0.155.90±0.3067.39-1.18+1.210.50±4°★
20.4+0.5~+1.13301.50±0.156.60±0.3074.88-1.31+1.340.50±4°★
22.4+0.6~+1.23301.70±0.207.35±0.3582.37-1.44+1.480.50±4°●
25.4+0.6~+1.23301.75±0.207.65±0.4593.60-1.64+1.680.50±4°●
26.4+0.7~+1.33301.75±0.207.75±0.4597.34-1.71+1.740.50±4°●
28.4+0.7~+1.33302.00±0.208.55±0.45104.83-1.84+1.880.50±4°●
30.4+0.7~+1.33302.00±0.209.45±0.55112.32-1.97+2.010.50±4°●
32.4+0.7~+1.33302.00±0.2010.45±0.55119.81-2.10+2.150.50±4°●

Material Grade Selection

Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.

KENIN Carbide Grades

Typical Applications

For specialized tool geometries requiring three 40° helical coolant channels. Confirm the channel layout against the final tool design.

This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.

Customization & Drawing Review

For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:

  • Outside diameter and length.
  • Hole count, diameter, position and spacing.
  • Helix angle and pitch, where applicable.
  • Chamfer, taper, slot, groove or stepped profile.
  • Ground or unground supply condition.
  • Required tolerances and inspection method.

Non-standard requests are subject to technical review and manufacturing feasibility confirmation.

Information Required for Quotation

Provide D, L, hole diameter, TK, helix angle, pitch, indexing requirement and a dimensioned drawing.

Please also include:

  1. Quantity per size.
  2. Required delivery destination.
  3. Any drawing revision or inspection specification.

Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.

Related Resources

Frequently Asked Questions

What are 40° triple helical coolant-hole rods?
Three helical coolant passages in the catalog's 40° configuration.
Which geometry needs review for three 40° channels?
Provide the cross-section with three hole centers and specify hole diameter, TK, pitch and indexing. The channel layout must match the final tool design.
What should I include when ordering 40° triple helical coolant-hole rods?
Provide D, L, hole diameter, TK, helix angle, pitch, indexing requirement and a dimensioned drawing. Include supply condition, surface requirements and the desired delivery date.
Can the 40° triple helical coolant-hole rods configuration be customized?
Submit the selected catalog reference and a dimensioned drawing. Provide the cross-section with three hole centers and specify hole diameter, TK, pitch and indexing. Feasibility, grade and finishing must be confirmed for your request.
Does the catalog confirm current availability of 40° triple helical coolant-hole rods?
The catalog describes this configuration, not live inventory. Confirm the selected size, quantity and delivery requirement in the quotation; retain any size-specific supply classification.

Request a Quote for 40° Triple Helical Coolant-Hole Rods

Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.

Request a Quote Send Your Drawing