Micro-Diameter Helical Rods

Helical Coolant-Hole Rods

Micro-Diameter Helical Rods

Small-diameter helical carbide blanks with closely specified coolant-hole dimensions and helix geometry.

Product Overview

Small-diameter helical carbide blanks with closely specified coolant-hole dimensions and helix geometry.

Configuration & Design Characteristics

For small-diameter rotary tools where the internal coolant-channel geometry occupies a limited cross-section. Confirm the remaining carbide web and final flute design with the tool drawing.

For this helical configuration, specify channel count, hole diameter d, TK, helix angle, pitch P and pitch tolerance. Three-channel designs also require review of indexing deviation α. Do not infer the pitch from the helix angle without confirming the catalog definition and the selected diameter.

Technical Specifications

The 2026 KENIN catalog provides the following specification fields for this product:

Blank D, D tolerance, L, hole d, d tolerance, TK, TK tolerance, helix angle, pitch P and pitch limits, eccentricity es. Catalog examples include blank diameters around 3.3–4.3 mm with multiple small hole sizes and angles; exact combinations are row-specific.

Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.

★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.

Micro-Diameter Helical Rods — Micro-diameter helical dimensions · 2026 catalog
Blank DD tol.L (mm)Hole dd tol.TKTK tol.Helix anglePitch PP lowerP upperOffset esStock
3.3+0.3~+0.63300.40±0.101.60±0.103016.32-0.32+0.330.10★
3.4+0.4~+1.03300.30±0.101.30±0.104011.23-0.20+0.200.10★
3.3+0.4~+1.03300.20±0.100.90±0.1046.39.00-0.23+0.240.05★
3.3+0.4~+1.03300.10±0.030.45±0.0562.15.00-0.16+0.160.05★
3.3+0.4~+1.03300.07±0.030.37±0.05674.00-0.14+0.150.05★
4.3+0.7~+1.33300.25±0.101.20±0.103021.77-0.64+0.670.10★
4.3+0.7~+1.33300.60±0.101.60±0.103021.77-0.64+0.670.10★
4.3+0.7~+1.33300.60±0.102.10±0.103021.77-0.64+0.670.10★
4.3+0.7~+1.33300.40±0.101.75±0.103517.95-0.49+0.510.10★
4.3+0.7~+1.33300.40±0.101.60±0.104014.98-0.39+0.410.10★
4.3+0.7~+1.33300.30±0.101.00±0.1046.312.01-0.31+0.320.10★
4.3+0.7~+1.33300.20±0.100.90±0.1054.49.00-0.25+0.250.05★
4.3+0.7~+1.33300.16±0.050.75±0.05607.26-0.22+0.220.05★
4.3+0.7~+1.33300.23±0.050.80±0.10607.26-0.22+0.220.05★
4.3+0.7~+1.33300.13±0.050.60±0.0564.56.00-0.20+0.200.05★
Micro-Diameter Helical Rods — Length tolerance — micro-diameter helical rods · 2026 catalog
Length L (mm)Tolerance (mm)
<150+0.5/+1.0
150≤L≤300+1.0/+2.0
>300+2.0/+5.0

Material Grade Selection

Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.

KENIN Carbide Grades

Typical Applications

For small-diameter rotary tools where the internal coolant-channel geometry occupies a limited cross-section. Confirm the remaining carbide web and final flute design with the tool drawing.

This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.

Customization & Drawing Review

For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:

  • Outside diameter and length.
  • Hole count, diameter, position and spacing.
  • Helix angle and pitch, where applicable.
  • Chamfer, taper, slot, groove or stepped profile.
  • Ground or unground supply condition.
  • Required tolerances and inspection method.

Non-standard requests are subject to technical review and manufacturing feasibility confirmation.

Information Required for Quotation

Provide detailed cross-section, D, d, TK, helix angle, pitch, eccentricity, length and tolerance requirements.

Please also include:

  1. Quantity per size.
  2. Required delivery destination.
  3. Any drawing revision or inspection specification.

Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.

Related Resources

Frequently Asked Questions

What are micro-diameter helical rods?
Small-diameter helical carbide blanks with closely specified coolant-hole dimensions and helix geometry.
What drawing is needed for a micro-diameter rod?
Provide a detailed cross-section showing hole size, position, TK and the intended flute geometry. Review the remaining carbide web for the selected configuration.
What should I include when ordering micro-diameter helical rods?
Provide detailed cross-section, D, d, TK, helix angle, pitch, eccentricity, length and tolerance requirements. Include supply condition, surface requirements and the desired delivery date.
Can the micro-diameter helical rods configuration be customized?
Submit the selected catalog reference and a dimensioned drawing. Provide a detailed cross-section showing hole size, position, TK and the intended flute geometry. Feasibility, grade and finishing must be confirmed for your request.
Does the catalog confirm current availability of micro-diameter helical rods?
The catalog describes this configuration, not live inventory. Confirm the selected size, quantity and delivery requirement in the quotation; retain any size-specific supply classification.

Request a Quote for Micro-Diameter Helical Rods

Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.

Request a Quote Send Your Drawing