Tapered, Preformed & Stepped Rods

Tapered, Preformed & Stepped Rods

Cemented Tungsten Carbide Rod Blanks for Cutting Tool Manufacturers

Cemented Tungsten Carbide Rod Blanks for Cutting Tool Manufacturers

KENIN supplies tapered, preformed & stepped rods for cutting-tool manufacturers and industrial buyers sourcing cemented carbide blanks. This category brings together the configurations shown in the KENIN 2026 rod catalog. Product selection should be based on the actual blank geometry, supply condition, dimensional requirements and intended tool design.

Explore the product series below. Each detail page should be treated as the source for its own catalog dimensions and tolerance notes; values must not be transferred between product families.

Tapered, Preformed & Stepped Rods Products

Product Selection: What to Compare

When comparing tapered, preformed & stepped rods, start with the finished tool design and work backward to the blank specification. Confirm:

  • Nominal blank or ground outside diameter and its stated tolerance.
  • Overall rod length and applicable length tolerance.
  • Internal coolant-hole or external profile geometry, where applicable.
  • Surface and supply condition: sintered/unground, rough-ground or precision-ground, as identified for the product.
  • Chamfer, groove, slot, step or taper details shown on the drawing.
  • Required carbide grade and the intended workpiece/tool application.

Technical Specification Guidance

KENIN's 2026 catalog provides product-specific tables. The applicable fields depend on the configuration:

  • Ground tapered solid rods: ground D, D tolerance, L, length tolerance, chamfer angle, chamfer C and taper angle.
  • Tapered helical rods with oil grooves: ground D, L, groove width B, groove depth T, chamfer details, taper angle, coolant-hole d, TK, pitch P and eccentricity.
  • Stepped and preformed blanks: profile dimensions and tolerances are defined by the approved drawing.

The illustrated preform profiles include stepped rods, blind-hole steps, T-shaped rods, hob blanks, tool strips, ball-end and tapered stepped forms. Illustrations are not dimensional specifications.

Carbide Grade Selection

Grade choice depends on tool type, workpiece material, cutting conditions and the required balance of hardness, wear resistance and toughness. The 2026 rod catalog includes grade references and application recommendations. Do not assume every grade is available for every diameter or geometry.

KENIN Carbide Grades

Typical Applications

This product family is intended for use as a semi-finished carbide blank in the tool designs represented by the catalog. Suitability depends on the final geometry, material grade and machining conditions. Ask the KENIN team to review the intended tool and drawing.

Customization & Technical Review

For a non-standard size or geometry, send:

  1. Product type or drawing number.
  2. Blank/finished diameter and overall length.
  3. Relevant geometry: hole count, d, TK, helix angle, pitch, slot, groove, taper or step.
  4. Tolerance and finishing condition.
  5. Grade or intended tool/workpiece material.
  6. Quantity and destination country.

All non-standard dimensions and special features are subject to drawing review and manufacturing feasibility confirmation.

State the required supply condition, surface requirements, desired delivery date and inspection method. Availability and delivery are confirmed in the quotation.

Related Resources

Frequently Asked Questions

Which drawing defines a shaped rod?
Provide axial and cross-section views with profile transitions, critical diameters, lengths and tolerances.
What distinguishes tapered solid rods from grooved helical rods?
The latter combine an external tapered and grooved profile with internal helical coolant geometry. Both sets of features need review.
Are preform illustrations dimensioned standard parts?
No. They show profile families; the approved part drawing defines dimensions and acceptance requirements.
How should a finishing tolerance be specified?
Identify the surfaces to be ground and the required tolerance on each. Resolve any catalog table or finishing-note discrepancy before ordering.
What should accompany a shaped-rod quotation request?
Include the drawing revision, material/application, supply condition, surface requirements, quantity, delivery destination and intended inspection method.

Request a Quote

Send KENIN your drawing, catalog reference or dimensional requirements. Our team can review the selected configuration and confirm the applicable material, dimensions, finishing condition and quotation details.

Request a Quote Send Your Drawing