Ground Tapered Helical Rods with Oil Grooves

Tapered, Preformed & Stepped Rods

Ground Tapered Helical Rods with Oil Grooves

Tapered ground carbide blanks combining helical coolant geometry and external oil-groove features.

Product Overview

Tapered ground carbide blanks combining helical coolant geometry and external oil-groove features.

Configuration & Design Characteristics

For special cutting-tool designs requiring a tapered profile, internal helical passages and external grooves. This is a geometry-specific configuration, not a general-purpose rod.

This shaped configuration is drawing-dependent. Confirm the main diameter, overall length, profile transitions, taper, groove or step dimensions, chamfer and all critical tolerances on a dimensioned drawing. Catalog illustrations show profile families and are not a substitute for a controlled drawing.

Technical Specifications

The 2026 KENIN catalog provides the following specification fields for this product:

Ground D, D tolerance, L, length tolerance, groove width B, groove depth T, chamfer angle and C, taper angle, coolant-hole d, TK, pitch P and pitch limits, eccentricity es. Catalog table lists h5 ground diameter and made-to-order classification; verify each row and drawing.

Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.

★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.

Catalog supply classification: made to order for this product series. Confirm the selected drawing, availability and lead time in the quotation. The D 18.0 / L 123 taper-angle entry omits a degree symbol in the source; confirm the drawing before use as an inspection criterion.

Ground Tapered Helical Rods with Oil Grooves — Tapered helical and oil-groove dimensions · 2026 catalog
Ground DD tol.LL tol.Groove BDepth TChamfer angleChamfer CTaper angleHole dTKPitch PP lowerP upperOffset es
6.0h566+0~+0.51.5±0.20.9(0.0~+0.4)45°±3°0.5±0.1140°(0°~+2°)0.702.4032.65-0.65+0.670.15
6.0h582+0~+0.51.5±0.20.9(0.0~+0.4)45°±3°0.5±0.1140°(0°~+2°)0.702.4032.65-0.65+0.670.15
8.0h579+0~+0.52.0±0.21.4(0.0~+0.4)45°±3°0.6±0.1140°(0°~+2°)1.003.8043.53-0.86+0.890.15
8.0h591+0~+0.52.0±0.21.4(0.0~+0.4)45°±3°0.6±0.1140°(0°~+2°)1.003.8043.53-0.86+0.890.15
10.0h589+0~+0.52.5±0.21.65(0.0~+0.4)45°±3°0.6±0.1140°(0°~+2°)1.404.5054.41-1.08+1.110.20
10.0h5103+0~+0.52.5±0.21.65(0.0~+0.4)45°±3°0.6±0.1140°(0°~+2°)1.404.5054.41-1.08+1.110.20
12.0h5102+0~+0.52.5±0.21.75(0.0~+0.4)45°±3°0.8±0.1140°(0°~+2°)1.405.8565.30-1.30+1.340.30
12.0h5107+0~+0.52.5±0.21.75(0.0~+0.4)45°±3°0.8±0.1140°(0°~+2°)1.405.8565.30-1.30+1.340.30
14.0h5118+0~+0.53.0±0.22.15(0.0~+0.4)45°±3°0.8±0.1140°(0°~+2°)1.756.7076.18-1.51+1.560.37
14.0h5124+0~+0.53.0±0.22.15(0.0~+0.4)45°±3°0.8±0.1140°(0°~+2°)1.756.7076.18-1.51+1.560.37
16.0h5115+0~+0.53.0±0.22.3(0.0~+0.4)45°±3°0.8±0.1140°(0°~+2°)1.757.9087.06-1.73+1.780.40
16.0h5133+0~+0.53.0±0.22.3(0.0~+0.4)45°±3°0.8±0.1140°(0°~+2°)1.757.9087.06-1.73+1.780.40
18.0h5123+0~+0.53.5±0.22.5(0.0~+0.4)45°±3°0.8±0.1140(0°~+2°)2.009.1597.95-1.94+2.000.50
18.0h5143+0~+0.53.5±0.22.5(0.0~+0.4)45°±3°0.8±0.1140°(0°~+2°)2.009.1597.95-1.94+2.000.50
20.0h5131+0~+0.53.5±0.22.7(0.0~+0.4)45°±3°1.0±0.1140°(0°~+2°)2.009.90108.83-2.16+2.230.50
20.0h5153+0~+0.53.5±0.22.7(0.0~+0.4)45°±3°1.0±0.1140°(0°~+2°)2.009.90108.83-2.16+2.230.50

Technical confirmation required: some taper-angle entries omit a degree symbol. The solid-rod finishing note states h5 while the table lists h5/h6. Original entries are retained; do not use unresolved entries as final inspection criteria.

Material Grade Selection

Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.

KENIN Carbide Grades

Typical Applications

For special cutting-tool designs requiring a tapered profile, internal helical passages and external grooves. This is a geometry-specific configuration, not a general-purpose rod.

This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.

Customization & Drawing Review

For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:

  • Outside diameter and length.
  • Hole count, diameter, position and spacing.
  • Helix angle and pitch, where applicable.
  • Chamfer, taper, slot, groove or stepped profile.
  • Ground or unground supply condition.
  • Required tolerances and inspection method.

Non-standard requests are subject to technical review and manufacturing feasibility confirmation.

Information Required for Quotation

Provide full axial profile and cross-section drawing, groove width/depth, D, L, d, TK, pitch, taper and chamfer details.

Please also include:

  1. Quantity per size.
  2. Required delivery destination.
  3. Any drawing revision or inspection specification.

Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.

Related Resources

Frequently Asked Questions

What are ground tapered helical rods with oil grooves?
Tapered ground carbide blanks combining helical coolant geometry and external oil-groove features.
Which groove details should accompany the coolant geometry?
Include groove width B, groove depth T, taper and chamfer details in the axial drawing, together with d, TK and pitch in the coolant-channel specification.
What should I include when ordering ground tapered helical rods with oil grooves?
Provide full axial profile and cross-section drawing, groove width/depth, D, L, d, TK, pitch, taper and chamfer details. Include supply condition, surface requirements and the desired delivery date.
Can the ground tapered helical rods with oil grooves configuration be customized?
Submit the selected catalog reference and a dimensioned drawing. Include groove width B, groove depth T, taper and chamfer details in the axial drawing, together with d, TK and pitch in the coolant-channel specification.. Feasibility, grade and finishing must be confirmed for your request.
Does the catalog confirm current availability of ground tapered helical rods with oil grooves?
The catalog describes this configuration, not live inventory. Confirm the selected size, quantity and delivery requirement in the quotation; retain any size-specific supply classification.

Request a Quote for Ground Tapered Helical Rods with Oil Grooves

Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.

Request a Quote Send Your Drawing