Solid Carbide Rods

Solid Carbide Rods

Cemented Tungsten Carbide Rod Blanks for Cutting Tool Manufacturers

Cemented Tungsten Carbide Rod Blanks for Cutting Tool Manufacturers

KENIN supplies solid carbide rods for cutting-tool manufacturers and industrial buyers sourcing cemented carbide blanks. This category brings together the configurations shown in the KENIN 2026 rod catalog. Product selection should be based on the actual blank geometry, supply condition, dimensional requirements and intended tool design.

Explore the product series below. Each detail page should be treated as the source for its own catalog dimensions and tolerance notes; values must not be transferred between product families.

Solid Carbide Rods Products

Product Selection: What to Compare

When comparing solid carbide rods, start with the finished tool design and work backward to the blank specification. Confirm:

  • Nominal blank or ground outside diameter and its stated tolerance.
  • Overall rod length and applicable length tolerance.
  • Internal coolant-hole or external profile geometry, where applicable.
  • Surface and supply condition: sintered/unground, rough-ground or precision-ground, as identified for the product.
  • Chamfer, groove, slot, step or taper details shown on the drawing.
  • Required carbide grade and the intended workpiece/tool application.

Technical Specification Guidance

KENIN's 2026 catalog provides product-specific tables. The applicable fields depend on the configuration:

  • Solid blank: blank diameter D, positive diameter allowance, length L and catalog supply classification.
  • Rough-ground: rough-ground diameter, tolerance, length and remaining grinding allowance.
  • Fixed-length ground: ground diameter, OD tolerance, length, length tolerance and chamfer C.
  • Side-lock: ground D, L, slot width L1, end-to-slot-center distance L0, slot depth h, tolerance and slot angle θ.

The catalog's ★ and ● symbols indicate standard-stock and made-to-order classifications. They are not live inventory status. Confirm current availability and lead time in the quotation.

Carbide Grade Selection

Grade choice depends on tool type, workpiece material, cutting conditions and the required balance of hardness, wear resistance and toughness. The 2026 rod catalog includes grade references and application recommendations. Do not assume every grade is available for every diameter or geometry.

KENIN Carbide Grades

Typical Applications

This product family is intended for use as a semi-finished carbide blank in the tool designs represented by the catalog. Suitability depends on the final geometry, material grade and machining conditions. Ask the KENIN team to review the intended tool and drawing.

Customization & Technical Review

For a non-standard size or geometry, send:

  1. Product type or drawing number.
  2. Blank/finished diameter and overall length.
  3. Relevant geometry: hole count, d, TK, helix angle, pitch, slot, groove, taper or step.
  4. Tolerance and finishing condition.
  5. Grade or intended tool/workpiece material.
  6. Quantity and destination country.

All non-standard dimensions and special features are subject to drawing review and manufacturing feasibility confirmation.

State the required supply condition, surface requirements, desired delivery date and inspection method. Availability and delivery are confirmed in the quotation.

Related Resources

Frequently Asked Questions

How do I choose between blank and ground solid rods?
Start with the finished tool diameter and your remaining grinding operations. Match the required supply condition to the corresponding solid, rough-ground or prepared-blank table.
What must be specified for a side-lock rod?
Provide the holder interface, slot width, depth and position, together with rod diameter and length.
Which details matter for fixed-length chamfered rods?
Confirm diameter, length, both applicable tolerances and chamfer dimensions for the selected combination.
Can one tolerance be used across all solid rod types?
No. Sintered blanks, rough-ground rods and prepared ground rods have distinct specifications. Use the selected product table.
What should accompany a solid-rod inquiry?
Include supply condition, diameter, length, allowance or finished tolerance, grade/application, quantity, drawing revision and desired delivery date.

Request a Quote

Send KENIN your drawing, catalog reference or dimensional requirements. Our team can review the selected configuration and confirm the applicable material, dimensions, finishing condition and quotation details.

Request a Quote Send Your Drawing