Fixed-Length Ground Chamfered Rods
Metric ground rods supplied in listed fixed lengths with a specified end chamfer.
View Details
Solid cylindrical blanks with positive diameter allowances for subsequent grinding.
Solid cylindrical blanks with positive diameter allowances for subsequent grinding.
For toolmakers who cut, grind and finish their own solid carbide blanks. The positive allowance must be included when calculating the finished tool diameter.
For this configuration, review the supplied outside diameter, length, surface condition and any prepared end or shank feature. Where a blank is intended for further grinding, distinguish the supplied blank diameter from the final tool diameter. Positive allowance is not a finished-diameter tolerance.
The 2026 KENIN catalog provides the following specification fields for this product:
Blank diameter D, positive diameter allowance, length L, supply condition and grade. Catalog lists metric blank diameters from 2.2 mm to 40.2 mm, generally in 310/330 mm lengths; the exact tolerance varies by diameter row. ★ and ● are catalog classifications, not live inventory.
Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.
★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.
| Blank dia. D (mm) | Tolerance (mm) | Length L (mm) | Availability |
|---|---|---|---|
| 2.2 | +0.0~+0.2 | 310/330 | ★ |
| 3.2 | +0.0~+0.2 | 310/330 | ★ |
| 4.2 | +0.0~+0.2 | 310/330 | ★ |
| 4.3 | +0.05~+0.25 | 310/330 | ★ |
| 5.2 | +0.0~+0.2 | 310/330 | ★ |
| 6.2 | +0.0~+0.2 | 310/330 | ★ |
| 6.3 | +0.05~+0.25 | 310/330 | ★ |
| 7.2 | +0.1~+0.4 | 310/330 | ★ |
| 8.2 | +0.1~+0.4 | 310/330 | ★ |
| 9.2 | +0.1~+0.4 | 310/330 | ★ |
| 10.2 | +0.1~+0.4 | 310/330 | ★ |
| 11.2 | +0.1~+0.4 | 310/330 | ★ |
| 12.2 | +0.1~+0.4 | 310/330 | ★ |
| 13.2 | +0.2~+0.5 | 310/330 | ★ |
| 14.2 | +0.2~+0.5 | 310/330 | ★ |
| 15.2 | +0.2~+0.5 | 310/330 | ★ |
| 16.2 | +0.2~+0.5 | 310/330 | ★ |
| 17.2 | +0.2~+0.5 | 310/330 | ★ |
| 18.2 | +0.2~+0.5 | 310/330 | ★ |
| 19.2 | +0.2~+0.5 | 310/330 | ★ |
| 20.2 | +0.3~+0.7 | 310/330 | ★ |
| 21.2 | +0.3~+0.7 | 310/330 | ★ |
| 22.2 | +0.3~+0.7 | 310/330 | ★ |
| 23.2 | +0.3~+0.7 | 310/330 | ★ |
| 24.2 | +0.3~+0.7 | 310/330 | ★ |
| 25.2 | +0.3~+0.7 | 310/330 | ★ |
| 26.2 | +0.3~+0.7 | 310/330 | ★ |
| 27.2 | +0.3~+0.7 | 310/330 | ★ |
| 28.2 | +0.3~+0.7 | 310/330 | ★ |
| 29.2 | +0.3~+0.7 | 310/330 | ★ |
| 30.2 | +0.3~+0.8 | 310/330 | ★ |
| 31.2 | +0.3~+0.8 | 310/330 | ★ |
| 32.2 | +0.3~+0.8 | 310/330 | ★ |
| 33.2 | +0.3~+0.8 | 310/330 | ● |
| 34.2 | +0.3~+0.8 | 310/330 | ● |
| 35.2 | +0.3~+0.8 | 310/330 | ● |
| 36.2 | +0.3~+0.8 | 310/330 | ● |
| 37.2 | +0.3~+0.8 | 310/330 | ● |
| 38.2 | +0.3~+0.8 | 310/330 | ● |
| 39.2 | +0.3~+0.8 | 310/330 | ● |
| 40.2 | +0.3~+0.8 | 310/330 | ● |
| Length L (mm) | Tolerance (mm) |
|---|---|
| L≤50 | +0.5/+1.0 |
| 50<L<150 | +0.75/+1.25 |
| 150≤L≤300 | +1.0/+2.0 |
| >300 | +2.0/+5.0 |
Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.
For toolmakers who cut, grind and finish their own solid carbide blanks. The positive allowance must be included when calculating the finished tool diameter.
This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.
For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:
Non-standard requests are subject to technical review and manufacturing feasibility confirmation.
Specify blank D, length, tolerance, allowance, grade/application and quantity.
Please also include:
Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.
Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.