Rough-Ground Solid Rods

Solid Carbide Rods

Rough-Ground Solid Rods

Rough-ground solid rods with the diameter allowance stated for each size.

Product Overview

Rough-ground solid rods with the diameter allowance stated for each size.

Configuration & Design Characteristics

For manufacturers who want an initial controlled outside diameter but still perform final grinding or tool profiling in-house.

For this configuration, review the supplied outside diameter, length, surface condition and any prepared end or shank feature. Where a blank is intended for further grinding, distinguish the supplied blank diameter from the final tool diameter. Positive allowance is not a finished-diameter tolerance.

Technical Specifications

The 2026 KENIN catalog provides the following specification fields for this product:

Rough-ground diameter D, diameter tolerance, length L, remaining finishing allowance and catalog supply classification. Use the product-specific table; do not transfer tolerances from sintered blanks or precision-ground products.

Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.

★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.

Rough-Ground Solid Rods — Rough-ground dimensions · 2026 catalog
Rough-ground dia. D (mm)Tolerance (mm)Length L (mm)Stock
4.0+0.15~+0.25310/330●
5.0+0.15~+0.25310/330●
6.0+0.15~+0.25310/330●
7.0+0.15~+0.25310/330●
8.0+0.15~+0.25310/330●
9.0+0.15~+0.25310/330●
10.0+0.15~+0.25310/330●
11.0+0.15~+0.25310/330●
12.0+0.15~+0.25310/330●
13.0+0.15~+0.25310/330●
14.0+0.15~+0.25310/330●
15.0+0.15~+0.25310/330●
16.0+0.15~+0.25310/330●
17.0+0.15~+0.25310/330●
18.0+0.15~+0.25310/330●
19.0+0.15~+0.25310/330●
20.0+0.15~+0.25310/330●
21.0+0.15~+0.25310/330●
22.0+0.15~+0.25310/330●
23.0+0.15~+0.25310/330●
24.0+0.15~+0.25310/330●
25.0+0.15~+0.25310/330●
Rough-Ground Solid Rods — Length tolerance — rough-ground rods · 2026 catalog
Length L (mm)Tolerance (mm)
L≤50+0.5/+1.0
50<L<150+0.75/+1.25
150≤L≤300+1.0/+2.0
>300+2.0/+5.0

Material Grade Selection

Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.

KENIN Carbide Grades

Typical Applications

For manufacturers who want an initial controlled outside diameter but still perform final grinding or tool profiling in-house.

This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.

Customization & Drawing Review

For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:

  • Outside diameter and length.
  • Hole count, diameter, position and spacing.
  • Helix angle and pitch, where applicable.
  • Chamfer, taper, slot, groove or stepped profile.
  • Ground or unground supply condition.
  • Required tolerances and inspection method.

Non-standard requests are subject to technical review and manufacturing feasibility confirmation.

Information Required for Quotation

Specify required rough-ground D, remaining grinding stock, length, final target diameter, grade/application and quantity.

Please also include:

  1. Quantity per size.
  2. Required delivery destination.
  3. Any drawing revision or inspection specification.

Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.

Related Resources

Frequently Asked Questions

What are rough-ground solid rods?
Rough-ground solid rods with the diameter allowance stated for each size.
What should I specify for a rough-ground rod?
State the supplied diameter, remaining grinding stock and final target diameter. The allowance must be reviewed for the selected rough-ground configuration.
What should I include when ordering rough-ground solid rods?
Specify required rough-ground D, remaining grinding stock, length, final target diameter, grade/application and quantity. Include supply condition, surface requirements and the desired delivery date.
Can the rough-ground solid rods configuration be customized?
Submit the selected catalog reference and a dimensioned drawing. State the supplied diameter, remaining grinding stock and final target diameter. Feasibility, grade and finishing must be confirmed for your request.
Does the catalog confirm current availability of rough-ground solid rods?
The catalog describes this configuration, not live inventory. Confirm the selected size, quantity and delivery requirement in the quotation; retain any size-specific supply classification.

Request a Quote for Rough-Ground Solid Rods

Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.

Request a Quote Send Your Drawing