Fixed-Length Ground Chamfered Rods

Solid Carbide Rods

Fixed-Length Ground Chamfered Rods

Metric ground rods supplied in listed fixed lengths with a specified end chamfer.

Product Overview

Metric ground rods supplied in listed fixed lengths with a specified end chamfer.

Configuration & Design Characteristics

For toolmakers seeking a prepared ground blank with a defined length and chamfer before subsequent flute or profile grinding.

For this configuration, review the supplied outside diameter, length, surface condition and any prepared end or shank feature. Where a blank is intended for further grinding, distinguish the supplied blank diameter from the final tool diameter. Positive allowance is not a finished-diameter tolerance.

Technical Specifications

The 2026 KENIN catalog provides the following specification fields for this product:

Ground D, OD tolerance, fixed length L, length tolerance, chamfer C and stock symbol. The catalog lists examples at D 4, 6 and 8 mm with multiple lengths; refer to the complete product table for each combination.

Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.

★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.

Fixed-Length Ground Chamfered Rods — Fixed-length dimensions · 2026 catalog
Ground D (mm)OD tol.L (mm)Length tol.Chamfer C (mm)Stock
4h5/h640+0.2~+0.50.4±0.1★
4h5/h650+0.2~+0.50.4±0.1★
4h5/h675+0.5~+1.00.4±0.1★
4h5/h6100+0.5~+1.00.4±0.1★
6h5/h650+0.2~+0.50.5±0.1★
6h5/h660+0.5~+1.00.5±0.1★
6h5/h666+0.5~+1.00.5±0.1★
6h5/h675+0.5~+1.00.5±0.1★
6h5/h682+0.5~+1.00.5±0.1★
6h5/h6100+0.5~+1.00.5±0.1★
8h5/h660+0.5~+1.00.6±0.1★
8h5/h675+0.5~+1.00.6±0.1★
8h5/h679+0.5~+1.00.6±0.1★
8h5/h691+0.5~+1.00.6±0.1★
8h5/h6100+0.5~+1.00.6±0.1★
10h5/h675+0.5~+1.00.6±0.1★
10h5/h689+0.5~+1.00.6±0.1★
10h5/h6100+0.5~+1.00.6±0.1★
10h5/h6103+0.5~+1.00.6±0.1★
10h5/h6150+0.5~+1.00.6±0.1★
12h5/h675+0.5~+1.00.8±0.1★
12h5/h6100+0.5~+1.00.8±0.1★
12h5/h6118+0.5~+1.00.8±0.1★
12h5/h6150+0.5~+1.00.8±0.1★
14h5/h6100+0.5~+1.00.8±0.1★
14h5/h6124+0.5~+1.00.8±0.1★
16h5/h6100+0.5~+1.00.8±0.1★
16h5/h6115+0.5~+1.00.8±0.1★
16h5/h6133+0.5~+1.00.8±0.1★
18h5/h6100+0.5~+1.01.0±0.1★
18h5/h6150+0.5~+1.01.0±0.1★
20h5/h6100+0.5~+1.01.0±0.1★
20h5/h6150+0.5~+1.01.0±0.1★
25h5/h6100+0.5~+1.01.0±0.1★
25h5/h6150+0.5~+1.01.0±0.1★
Fixed-Length Ground Chamfered Rods — Fixed-length reference · 2026 catalog
Length L (mm)Tolerance (mm)
≤50+0.2/+0.5
50<L≤150+0.5/+1.0

Material Grade Selection

Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.

KENIN Carbide Grades

Typical Applications

For toolmakers seeking a prepared ground blank with a defined length and chamfer before subsequent flute or profile grinding.

This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.

Customization & Drawing Review

For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:

  • Outside diameter and length.
  • Hole count, diameter, position and spacing.
  • Helix angle and pitch, where applicable.
  • Chamfer, taper, slot, groove or stepped profile.
  • Ground or unground supply condition.
  • Required tolerances and inspection method.

Non-standard requests are subject to technical review and manufacturing feasibility confirmation.

Information Required for Quotation

Specify ground D/tolerance, fixed length, length tolerance, chamfer C, grade/application and quantity.

Please also include:

  1. Quantity per size.
  2. Required delivery destination.
  3. Any drawing revision or inspection specification.

Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.

Related Resources

Frequently Asked Questions

What are fixed-length ground chamfered rods?
Metric ground rods supplied in listed fixed lengths with a specified end chamfer.
Which dimensions define a fixed-length chamfered rod?
Specify ground diameter, overall length, length tolerance and chamfer C. Select the complete diameter-and-length combination from the dedicated table.
What should I include when ordering fixed-length ground chamfered rods?
Specify ground D/tolerance, fixed length, length tolerance, chamfer C, grade/application and quantity. Include supply condition, surface requirements and the desired delivery date.
Can the fixed-length ground chamfered rods configuration be customized?
Submit the selected catalog reference and a dimensioned drawing. Specify ground diameter, overall length, length tolerance and chamfer C. Feasibility, grade and finishing must be confirmed for your request.
Does the catalog confirm current availability of fixed-length ground chamfered rods?
The catalog describes this configuration, not live inventory. Confirm the selected size, quantity and delivery requirement in the quotation; retain any size-specific supply classification.

Request a Quote for Fixed-Length Ground Chamfered Rods

Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.

Request a Quote Send Your Drawing