40° Twin Helical Coolant-Hole Rods

Helical Coolant-Hole Rods

40° Twin Helical Coolant-Hole Rods

Twin helical coolant passages with a 40° configuration and size-specific pitch values.

Product Overview

Twin helical coolant passages with a 40° configuration and size-specific pitch values.

Configuration & Design Characteristics

For tool designs specifying a 40° helical coolant-channel path. Select the configuration from the tool drawing rather than angle alone.

For this helical configuration, specify channel count, hole diameter d, TK, helix angle, pitch P and pitch tolerance. Three-channel designs also require review of indexing deviation α. Do not infer the pitch from the helix angle without confirming the catalog definition and the selected diameter.

Technical Specifications

The 2026 KENIN catalog provides the following specification fields for this product:

Blank D, D tolerance, L, hole d, d tolerance, TK, TK tolerance, pitch P and pitch limits, eccentricity es. The 2026 catalog lists 330 mm lengths for the shown configurations; confirm each size and supply symbol in the table.

Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.

★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.

40° Twin Helical Coolant-Hole Rods — 40° twin helical dimensions · 2026 catalog
Blank DD tol.L (mm)Hole dd tol.TKTK tol.Pitch PP lowerP upperOffset esStock
3.4+0.4~+1.03300.30±0.101.30±0.1011.23-0.20+0.200.10★
4.4+0.4~+1.03300.40±0.101.60±0.1014.98-0.26+0.270.10★
6.4+0.4~+1.03300.40±0.101.40±0.1022.46-0.39+0.400.15★
6.4+0.4~+1.03300.50±0.102.00±0.2022.46-0.39+0.400.15★
8.4+0.4~+1.03300.40±0.101.70±0.1029.95-0.53+0.540.15★
8.4+0.4~+1.03300.65±0.102.40±0.2029.95-0.53+0.540.15★
10.4+0.4~+1.03300.50±0.152.00±0.2037.44-0.66+0.670.20★
10.4+0.4~+1.03300.80±0.153.20±0.3037.44-0.66+0.670.20★
12.4+0.4~+1.03300.60±0.152.30±0.2044.93-0.79+0.800.30★
12.4+0.4~+1.03300.90±0.153.80±0.4044.93-0.79+0.800.30★
14.4+0.5~+1.13300.70±0.152.70±0.2052.42-0.92+0.940.37★
14.4+0.5~+1.13301.00±0.154.30±0.4052.42-0.92+0.940.37★
16.4+0.5~+1.13300.80±0.153.10±0.2059.90-1.05+1.070.40★
16.4+0.5~+1.13301.20±0.155.10±0.4059.90-1.05+1.070.40★
18.4+0.5~+1.13300.90±0.153.50±0.3067.39-1.18+1.210.50★
18.4+0.5~+1.13301.40±0.155.90±0.4067.39-1.18+1.210.50★
20.4+0.5~+1.13301.00±0.153.90±0.3074.88-1.31+1.340.50★
20.4+0.5~+1.13301.50±0.156.60±0.5074.88-1.31+1.340.50★
22.4+0.6~+1.23301.70±0.207.20±0.5082.37-1.44+1.480.50★
25.4+0.6~+1.23301.75±0.207.60±0.5093.60-1.64+1.680.50★
26.4+0.7~+1.33301.75±0.207.70±0.5097.34-1.71+1.740.50●
28.4+0.7~+1.33302.00±0.208.40±0.60104.83-1.84+1.880.50●
30.4+0.7~+1.33302.00±0.209.40±0.60112.32-1.97+2.010.50●
32.4+0.7~+1.33302.00±0.2010.40±0.60119.81-2.10+2.150.50●
40° Twin Helical Coolant-Hole Rods — Length tolerance — 40° twin helical rods · 2026 catalog
Length L (mm)Tolerance (mm)
<150+0.5/+1.0
150≤L≤300+1.0/+2.0
>300+2.0/+5.0

Material Grade Selection

Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.

KENIN Carbide Grades

Typical Applications

For tool designs specifying a 40° helical coolant-channel path. Select the configuration from the tool drawing rather than angle alone.

This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.

Customization & Drawing Review

For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:

  • Outside diameter and length.
  • Hole count, diameter, position and spacing.
  • Helix angle and pitch, where applicable.
  • Chamfer, taper, slot, groove or stepped profile.
  • Ground or unground supply condition.
  • Required tolerances and inspection method.

Non-standard requests are subject to technical review and manufacturing feasibility confirmation.

Information Required for Quotation

Provide D, L, hole size, TK, 40° angle, pitch, tolerances and intended tool geometry.

Please also include:

  1. Quantity per size.
  2. Required delivery destination.
  3. Any drawing revision or inspection specification.

Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.

Related Resources

Frequently Asked Questions

What are 40° twin helical coolant-hole rods?
Twin helical coolant passages with a 40° configuration and size-specific pitch values.
Is the 40° angle sufficient to select a rod?
No. Match diameter, hole size, TK and pitch to the drawing as well as the specified helix angle. Use the size-specific row rather than angle alone.
What should I include when ordering 40° twin helical coolant-hole rods?
Provide D, L, hole size, TK, 40° angle, pitch, tolerances and intended tool geometry. Include supply condition, surface requirements and the desired delivery date.
Can the 40° twin helical coolant-hole rods configuration be customized?
Submit the selected catalog reference and a dimensioned drawing. No. Feasibility, grade and finishing must be confirmed for your request.
Does the catalog confirm current availability of 40° twin helical coolant-hole rods?
The catalog describes this configuration, not live inventory. Confirm the selected size, quantity and delivery requirement in the quotation; retain any size-specific supply classification.

Request a Quote for 40° Twin Helical Coolant-Hole Rods

Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.

Request a Quote Send Your Drawing