Carbide Rods for Deep-Hole Drills
Long helical coolant-hole carbide blanks cataloged for deep-hole drill production.
View Details
Twin-channel helical rods with alternative helix angles and corresponding pitch values listed by configuration.
Twin-channel helical rods with alternative helix angles and corresponding pitch values listed by configuration.
For tool designs whose coolant path requires a helix angle other than the principal 30° or 40° series.
For this helical configuration, specify channel count, hole diameter d, TK, helix angle, pitch P and pitch tolerance. Three-channel designs also require review of indexing deviation α. Do not infer the pitch from the helix angle without confirming the catalog definition and the selected diameter.
The 2026 KENIN catalog provides the following specification fields for this product:
Blank D, D tolerance, L, hole d, d tolerance, TK, TK tolerance, helix angle, pitch P and pitch limits, eccentricity es. Catalog lists multiple angle values including 15°, 32.9°, 34.3°, 36°, 43°, 46° and other configurations; refer to each row rather than treating them as a continuous standard range.
Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.
★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.
| Blank D | D tol. | L (mm) | Hole d | d tol. | TK | TK tol. | Helix angle | Pitch P | P lower | P upper | Offset es | Stock |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6.3 | +0.4~+1.0 | 330 | 0.70 | ±0.15 | 2.60 | ±0.20 | 15 | 70.35 | -2.38 | +2.54 | 0.15 | ★ |
| 8.3 | +0.4~+1.0 | 330 | 1.25 | ±0.15 | 3.60 | ±0.20 | 15 | 93.80 | -3.17 | +3.38 | 0.15 | ★ |
| 14.3 | +0.7~+1.3 | 330 | 1.90 | ±0.20 | 6.70 | ±0.40 | 15 | 164.14 | -5.55 | +5.92 | 0.37 | ★ |
| 16.3 | +0.7~+1.3 | 330 | 2.10 | ±0.25 | 8.00 | ±0.40 | 15 | 187.59 | -6.34 | +6.77 | 0.40 | ★ |
| 18.3 | +0.7~+1.3 | 330 | 2.30 | ±0.25 | 9.00 | ±0.40 | 15 | 211.04 | -7.13 | +7.61 | 0.50 | ★ |
| 20.3 | +0.7~+1.3 | 330 | 2.50 | ±0.25 | 10.00 | ±0.50 | 15 | 234.49 | -7.93 | +8.46 | 0.50 | ★ |
| 6.3 | +0.7~+1.3 | 330 | 0.80 | ±0.10 | 1.90 | ±0.10 | 36 | 25.94 | -0.47 | +0.48 | 0.15 | ★ |
| 6.3 | +0.7~+1.3 | 330 | 0.60 | ±0.10 | 1.60 | ±0.10 | 43 | 20.21 | -0.35 | +0.36 | 0.15 | ★ |
| 6.3 | +0.7~+1.3 | 330 | 0.50 | ±0.10 | 1.70 | ±0.10 | 46 | 18.20 | -0.32 | +0.32 | 0.15 | ★ |
| 8.3 | +0.7~+1.3 | 330 | 1.00 | ±0.15 | 3.40 | ±0.20 | 36 | 34.59 | -0.63 | +0.64 | 0.20 | ★ |
| 10.3 | +0.7~+1.3 | 330 | 1.35 | ±0.15 | 4.40 | ±0.20 | 32.9 | 48.56 | -0.92 | +0.94 | 0.20 | ★ |
| 10.3 | +0.7~+1.3 | 330 | 1.15 | ±0.15 | 4.40 | ±0.20 | 34.3 | 46.05 | -0.85 | +0.87 | 0.20 | ★ |
| Length L (mm) | Tolerance (mm) |
|---|---|
| <150 | +0.5/+1.0 |
| 150≤L≤300 | +1.0/+2.0 |
| >300 | +2.0/+5.0 |
Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.
For tool designs whose coolant path requires a helix angle other than the principal 30° or 40° series.
This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.
For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:
Non-standard requests are subject to technical review and manufacturing feasibility confirmation.
Provide required helix angle, pitch or lead, D, L, d, TK, tolerances and drawing.
Please also include:
Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.
Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.