Carbide Rods for Deep-Hole Drills

Helical Coolant-Hole Rods

Carbide Rods for Deep-Hole Drills

Long helical coolant-hole carbide blanks cataloged for deep-hole drill production.

Product Overview

Long helical coolant-hole carbide blanks cataloged for deep-hole drill production.

Configuration & Design Characteristics

For manufacturing long-reach and deep-hole drilling tools. Long blanks require careful review of straightness, coolant-channel geometry and the tool maker's finishing process.

For this helical configuration, specify channel count, hole diameter d, TK, helix angle, pitch P and pitch tolerance. Three-channel designs also require review of indexing deviation α. Do not infer the pitch from the helix angle without confirming the catalog definition and the selected diameter.

Technical Specifications

The 2026 KENIN catalog provides the following specification fields for this product:

Blank D, D tolerance, long blank length L, hole d, d tolerance, TK, TK tolerance, helix angle, pitch P and pitch limits, eccentricity es and straightness. Catalog includes lengths of 430 mm and 530 mm for listed configurations; verify each diameter/length combination in the table.

Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.

★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.

Carbide Rods for Deep-Hole Drills — Deep-hole drill rod dimensions · 2026 catalog
Blank DD tol.L (mm)Hole dd tol.TKTK tol.Helix anglePitch PP lowerP upperOffset esStock
6.3+0.3~+0.6430.00.70±0.152.40±0.203032.65-0.65+0.670.15★
7.3+0.3~+0.6430.01.00±0.153.50±0.203038.09-0.76+0.780.15★
8.3+0.4~+0.7530.01.00±0.153.80±0.203043.53-0.86+0.890.20★
9.3+0.4~+1.0530.01.40±0.154.50±0.303048.97-0.97+1.000.20★
10.3+0.4~+1.0530.01.40±0.154.50±0.303054.41-1.08+1.110.20★
11.3+0.4~+1.0530.01.40±0.154.90±0.403059.861.19+1.220.28★
12.3+0.4~+1.0530.01.40±0.155.85±0.403065.30-1.30+1.340.30★
13.3+0.4~+1.0530.01.75±0.206.10±0.403070.74-1.40+1.450.34★
14.3+0.4~+1.0530.01.75±0.206.70±0.403076.18-1.51+1.560.37★
16.3+0.5~+1.1530.01.75±0.207.90±0.403087.06-1.731.780.40★
18.3+0.6~+1.2530.02.00±0.259.15±0.403097.95-1.94+2.000.50★
20.3+0.6~+1.2530.02.00±0.259.90±0.5030108.83-2.16+2.230.50★
25.3+0.7~+1.3530.02.00±0.2512.80±0.5030136.03-2.70+2.780.50★

Technical confirmation required: the D 11.3 row lists P lower as 1.19 without a minus sign, and the D 16.3 row lists P upper as 1.78 without a plus sign. These entries are retained exactly as supplied.

Material Grade Selection

Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.

KENIN Carbide Grades

Typical Applications

For manufacturing long-reach and deep-hole drilling tools. Long blanks require careful review of straightness, coolant-channel geometry and the tool maker's finishing process.

This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.

Customization & Drawing Review

For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:

  • Outside diameter and length.
  • Hole count, diameter, position and spacing.
  • Helix angle and pitch, where applicable.
  • Chamfer, taper, slot, groove or stepped profile.
  • Ground or unground supply condition.
  • Required tolerances and inspection method.

Non-standard requests are subject to technical review and manufacturing feasibility confirmation.

Information Required for Quotation

Provide tool length, blank length, D, d, TK, helix angle, pitch, straightness requirement and drawing.

Please also include:

  1. Quantity per size.
  2. Required delivery destination.
  3. Any drawing revision or inspection specification.

Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.

Related Resources

Frequently Asked Questions

What are carbide rods for deep-hole drills?
Long helical coolant-hole carbide blanks cataloged for deep-hole drill production.
Can a short-rod straightness requirement be used for a long blank?
Do not transfer a short-rod acceptance criterion to a deep-hole drill blank. State the full length, support and inspection requirements for technical review.
What should I include when ordering carbide rods for deep-hole drills?
Provide tool length, blank length, D, d, TK, helix angle, pitch, straightness requirement and drawing. Include supply condition, surface requirements and the desired delivery date.
Can the carbide rods for deep-hole drills configuration be customized?
Submit the selected catalog reference and a dimensioned drawing. Do not transfer a short-rod acceptance criterion to a deep-hole drill blank. Feasibility, grade and finishing must be confirmed for your request.
Does the catalog confirm current availability of carbide rods for deep-hole drills?
The catalog describes this configuration, not live inventory. Confirm the selected size, quantity and delivery requirement in the quotation; retain any size-specific supply classification.

Request a Quote for Carbide Rods for Deep-Hole Drills

Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.

Request a Quote Send Your Drawing