Twin Helical Rods with Other Helix Angles

Helical Coolant-Hole Rods

Twin Helical Rods with Other Helix Angles

Twin-channel helical rods with alternative helix angles and corresponding pitch values listed by configuration.

Product Overview

Twin-channel helical rods with alternative helix angles and corresponding pitch values listed by configuration.

Configuration & Design Characteristics

For tool designs whose coolant path requires a helix angle other than the principal 30° or 40° series.

For this helical configuration, specify channel count, hole diameter d, TK, helix angle, pitch P and pitch tolerance. Three-channel designs also require review of indexing deviation α. Do not infer the pitch from the helix angle without confirming the catalog definition and the selected diameter.

Technical Specifications

The 2026 KENIN catalog provides the following specification fields for this product:

Blank D, D tolerance, L, hole d, d tolerance, TK, TK tolerance, helix angle, pitch P and pitch limits, eccentricity es. Catalog lists multiple angle values including 15°, 32.9°, 34.3°, 36°, 43°, 46° and other configurations; refer to each row rather than treating them as a continuous standard range.

Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.

★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.

Twin Helical Rods with Other Helix Angles — Other helix angle dimensions · 2026 catalog
Blank DD tol.L (mm)Hole dd tol.TKTK tol.Helix anglePitch PP lowerP upperOffset esStock
6.3+0.4~+1.03300.70±0.152.60±0.201570.35-2.38+2.540.15★
8.3+0.4~+1.03301.25±0.153.60±0.201593.80-3.17+3.380.15★
14.3+0.7~+1.33301.90±0.206.70±0.4015164.14-5.55+5.920.37★
16.3+0.7~+1.33302.10±0.258.00±0.4015187.59-6.34+6.770.40★
18.3+0.7~+1.33302.30±0.259.00±0.4015211.04-7.13+7.610.50★
20.3+0.7~+1.33302.50±0.2510.00±0.5015234.49-7.93+8.460.50★
6.3+0.7~+1.33300.80±0.101.90±0.103625.94-0.47+0.480.15★
6.3+0.7~+1.33300.60±0.101.60±0.104320.21-0.35+0.360.15★
6.3+0.7~+1.33300.50±0.101.70±0.104618.20-0.32+0.320.15★
8.3+0.7~+1.33301.00±0.153.40±0.203634.59-0.63+0.640.20★
10.3+0.7~+1.33301.35±0.154.40±0.2032.948.56-0.92+0.940.20★
10.3+0.7~+1.33301.15±0.154.40±0.2034.346.05-0.85+0.870.20★
Twin Helical Rods with Other Helix Angles — Length tolerance — other helix angles · 2026 catalog
Length L (mm)Tolerance (mm)
<150+0.5/+1.0
150≤L≤300+1.0/+2.0
>300+2.0/+5.0

Material Grade Selection

Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.

KENIN Carbide Grades

Typical Applications

For tool designs whose coolant path requires a helix angle other than the principal 30° or 40° series.

This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.

Customization & Drawing Review

For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:

  • Outside diameter and length.
  • Hole count, diameter, position and spacing.
  • Helix angle and pitch, where applicable.
  • Chamfer, taper, slot, groove or stepped profile.
  • Ground or unground supply condition.
  • Required tolerances and inspection method.

Non-standard requests are subject to technical review and manufacturing feasibility confirmation.

Information Required for Quotation

Provide required helix angle, pitch or lead, D, L, d, TK, tolerances and drawing.

Please also include:

  1. Quantity per size.
  2. Required delivery destination.
  3. Any drawing revision or inspection specification.

Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.

Related Resources

Frequently Asked Questions

What are twin helical rods with other helix angles?
Twin-channel helical rods with alternative helix angles and corresponding pitch values listed by configuration.
Can I select any angle between the listed configurations?
The catalog lists discrete angle-and-pitch combinations. Other requirements need drawing review; the listed examples are not a continuous standard range.
What should I include when ordering twin helical rods with other helix angles?
Provide required helix angle, pitch or lead, D, L, d, TK, tolerances and drawing. Include supply condition, surface requirements and the desired delivery date.
Can the twin helical rods with other helix angles configuration be customized?
Submit the selected catalog reference and a dimensioned drawing. The catalog lists discrete angle-and-pitch combinations. Feasibility, grade and finishing must be confirmed for your request.
Does the catalog confirm current availability of twin helical rods with other helix angles?
The catalog describes this configuration, not live inventory. Confirm the selected size, quantity and delivery requirement in the quotation; retain any size-specific supply classification.

Request a Quote for Twin Helical Rods with Other Helix Angles

Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.

Request a Quote Send Your Drawing