Metric Solid Carbide Rods

Solid Carbide Rods

Metric Solid Carbide Rods

Solid cylindrical blanks with positive diameter allowances for subsequent grinding.

Product Overview

Solid cylindrical blanks with positive diameter allowances for subsequent grinding.

Configuration & Design Characteristics

For toolmakers who cut, grind and finish their own solid carbide blanks. The positive allowance must be included when calculating the finished tool diameter.

For this configuration, review the supplied outside diameter, length, surface condition and any prepared end or shank feature. Where a blank is intended for further grinding, distinguish the supplied blank diameter from the final tool diameter. Positive allowance is not a finished-diameter tolerance.

Technical Specifications

The 2026 KENIN catalog provides the following specification fields for this product:

Blank diameter D, positive diameter allowance, length L, supply condition and grade. Catalog lists metric blank diameters from 2.2 mm to 40.2 mm, generally in 310/330 mm lengths; the exact tolerance varies by diameter row. ★ and ● are catalog classifications, not live inventory.

Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.

★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.

Metric Solid Carbide Rods — Blank dimensions · 2026 catalog
Blank dia. D (mm)Tolerance (mm)Length L (mm)Availability
2.2+0.0~+0.2310/330★
3.2+0.0~+0.2310/330★
4.2+0.0~+0.2310/330★
4.3+0.05~+0.25310/330★
5.2+0.0~+0.2310/330★
6.2+0.0~+0.2310/330★
6.3+0.05~+0.25310/330★
7.2+0.1~+0.4310/330★
8.2+0.1~+0.4310/330★
9.2+0.1~+0.4310/330★
10.2+0.1~+0.4310/330★
11.2+0.1~+0.4310/330★
12.2+0.1~+0.4310/330★
13.2+0.2~+0.5310/330★
14.2+0.2~+0.5310/330★
15.2+0.2~+0.5310/330★
16.2+0.2~+0.5310/330★
17.2+0.2~+0.5310/330★
18.2+0.2~+0.5310/330★
19.2+0.2~+0.5310/330★
20.2+0.3~+0.7310/330★
21.2+0.3~+0.7310/330★
22.2+0.3~+0.7310/330★
23.2+0.3~+0.7310/330★
24.2+0.3~+0.7310/330★
25.2+0.3~+0.7310/330★
26.2+0.3~+0.7310/330★
27.2+0.3~+0.7310/330★
28.2+0.3~+0.7310/330★
29.2+0.3~+0.7310/330★
30.2+0.3~+0.8310/330★
31.2+0.3~+0.8310/330★
32.2+0.3~+0.8310/330★
33.2+0.3~+0.8310/330●
34.2+0.3~+0.8310/330●
35.2+0.3~+0.8310/330●
36.2+0.3~+0.8310/330●
37.2+0.3~+0.8310/330●
38.2+0.3~+0.8310/330●
39.2+0.3~+0.8310/330●
40.2+0.3~+0.8310/330●
Metric Solid Carbide Rods — Length tolerance — metric solid rods · 2026 catalog
Length L (mm)Tolerance (mm)
L≤50+0.5/+1.0
50<L<150+0.75/+1.25
150≤L≤300+1.0/+2.0
>300+2.0/+5.0

Material Grade Selection

Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.

KENIN Carbide Grades

Typical Applications

For toolmakers who cut, grind and finish their own solid carbide blanks. The positive allowance must be included when calculating the finished tool diameter.

This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.

Customization & Drawing Review

For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:

  • Outside diameter and length.
  • Hole count, diameter, position and spacing.
  • Helix angle and pitch, where applicable.
  • Chamfer, taper, slot, groove or stepped profile.
  • Ground or unground supply condition.
  • Required tolerances and inspection method.

Non-standard requests are subject to technical review and manufacturing feasibility confirmation.

Information Required for Quotation

Specify blank D, length, tolerance, allowance, grade/application and quantity.

Please also include:

  1. Quantity per size.
  2. Required delivery destination.
  3. Any drawing revision or inspection specification.

Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.

Related Resources

Frequently Asked Questions

What are metric solid carbide rods?
Solid cylindrical blanks with positive diameter allowances for subsequent grinding.
How should I allow for grinding a solid blank?
Use the diameter allowance in the selected blank row and identify the finished tool diameter. Do not treat a positive blank allowance as a ground-diameter tolerance.
What should I include when ordering metric solid carbide rods?
Specify blank D, length, tolerance, allowance, grade/application and quantity. Include supply condition, surface requirements and the desired delivery date.
Can the metric solid carbide rods configuration be customized?
Submit the selected catalog reference and a dimensioned drawing. Use the diameter allowance in the selected blank row and identify the finished tool diameter. Feasibility, grade and finishing must be confirmed for your request.
Does the catalog confirm current availability of metric solid carbide rods?
The catalog describes this configuration, not live inventory. Confirm the selected size, quantity and delivery requirement in the quotation; retain any size-specific supply classification.

Request a Quote for Metric Solid Carbide Rods

Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.

Request a Quote Send Your Drawing