Stepped & Preformed Carbide Rods

Tapered, Preformed & Stepped Rods

Stepped & Preformed Carbide Rods

A family of non-cylindrical and multi-profile carbide blanks for specialized tool designs.

Product Overview

A family of non-cylindrical and multi-profile carbide blanks for specialized tool designs.

Configuration & Design Characteristics

For toolmakers who need a near-net or pre-profiled carbide blank rather than a standard straight cylindrical rod. The catalog illustrates profile families; the approved drawing defines the actual part.

This shaped configuration is drawing-dependent. Confirm the main diameter, overall length, profile transitions, taper, groove or step dimensions, chamfer and all critical tolerances on a dimensioned drawing. Catalog illustrations show profile families and are not a substitute for a controlled drawing.

Technical Specifications

The 2026 KENIN catalog provides the following specification fields for this product:

Geometry may include stepped rods, stepped rods with blind holes, T-shaped rods, hob blanks, tool strips, preformed tool blanks, ball-end rods, ball-end stepped rods, tapered stepped rods and deep-groove stepped rods. Dimensions and tolerances are drawing-specific.

Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.

Stepped rod
Catalog illustration; confirm the final geometry against the drawing.
Stepped rod with blind hole
Catalog illustration; confirm the final geometry against the drawing.
T-shaped rod
Catalog illustration; confirm the final geometry against the drawing.
Hob blank
Catalog illustration; confirm the final geometry against the drawing.
Preformed tool blank
Catalog illustration; confirm the final geometry against the drawing.
Ball-end rod
Catalog illustration; confirm the final geometry against the drawing.
Stepped rod profile index · 2026 catalog
ProfileProduct photoDimensional drawing
Stepped rod  
Ball-end rod  
Ball-end stepped rod  
Tapered stepped rod  
Tapered stepped rod with twin helical oil grooves  
Deep-groove stepped rod  
Stepped rod dimensional drawing
Dimension symbols from the catalog; dimensions are specified by drawing.
Ball-end rod drawing
Dimension symbols from the catalog; dimensions are specified by drawing.
Ball-end stepped rod drawing
Dimension symbols from the catalog; dimensions are specified by drawing.
Tapered stepped rod drawing
Dimension symbols from the catalog; dimensions are specified by drawing.
Tapered stepped rod with twin helical grooves drawing
Dimension symbols from the catalog; dimensions are specified by drawing.
Deep-groove stepped rod drawing
Dimension symbols from the catalog; dimensions are specified by drawing.

Material Grade Selection

Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.

KENIN Carbide Grades

Typical Applications

For toolmakers who need a near-net or pre-profiled carbide blank rather than a standard straight cylindrical rod. The catalog illustrates profile families; the approved drawing defines the actual part.

This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.

Customization & Drawing Review

For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:

  • Outside diameter and length.
  • Hole count, diameter, position and spacing.
  • Helix angle and pitch, where applicable.
  • Chamfer, taper, slot, groove or stepped profile.
  • Ground or unground supply condition.
  • Required tolerances and inspection method.

Non-standard requests are subject to technical review and manufacturing feasibility confirmation.

Information Required for Quotation

Submit a dimensioned drawing or sample, material grade/application, critical dimensions, tolerances, finish requirements and quantity.

Please also include:

  1. Quantity per size.
  2. Required delivery destination.
  3. Any drawing revision or inspection specification.

Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.

Related Resources

Frequently Asked Questions

What are stepped & preformed carbide rods?
A family of non-cylindrical and multi-profile carbide blanks for specialized tool designs.
Do the illustrated preform profiles define standard dimensions?
No. The illustrations identify profile families. A dimensioned drawing defines the stepped, tapered, blind-hole or other features and their acceptance requirements.
What should I include when ordering stepped & preformed carbide rods?
Submit a dimensioned drawing or sample, material grade/application, critical dimensions, tolerances, finish requirements and quantity. Include supply condition, surface requirements and the desired delivery date.
Can the stepped & preformed carbide rods configuration be customized?
Submit the selected catalog reference and a dimensioned drawing. No. Feasibility, grade and finishing must be confirmed for your request.
Does the catalog confirm current availability of stepped & preformed carbide rods?
The catalog describes this configuration, not live inventory. Confirm the selected size, quantity and delivery requirement in the quotation; retain any size-specific supply classification.

Request a Quote for Stepped & Preformed Carbide Rods

Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.

Request a Quote Send Your Drawing