Single Straight Coolant-Hole Rods
A cemented carbide rod blank with one axial coolant passage running along the rod length.
View Details
Twin straight coolant passages with reduced hole diameters for designs that require a different internal-channel layout from the standard twin-hole series.
Twin straight coolant passages with reduced hole diameters for designs that require a different internal-channel layout from the standard twin-hole series.
For cutting-tool blanks where the designer specifies smaller coolant passages or a distinct web/channel relationship.
For this configuration, the coolant-hole geometry is a functional part of the blank design. Confirm the hole count, hole diameter d, hole tolerance, hole center position, eccentricity es and TK where two holes are present. The cross-section must match the tool drawing.
The 2026 KENIN catalog provides the following specification fields for this product:
Blank D, D tolerance, L, reduced hole diameter d, d tolerance, TK, TK tolerance and eccentricity es. Use the dedicated reduced-hole table; compare d and TK with the standard twin-hole series before selection.
Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.
★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.
| Blank D | D tol. | L (mm) | Hole d | d tol. | TK | TK tol. | Offset es | Stock |
|---|---|---|---|---|---|---|---|---|
| 6.2 | +0.1~+0.3 | 330/360/415 | 0.80 | ±0.10 | 1.50 | ±0.10 | 0.15 | ★ |
| 7.2 | +0.1~+0.3 | 330 | 0.80 | ±0.10 | 1.50 | ±0.10 | 0.15 | ★ |
| 8.2 | +0.1~+0.4 | 330 | 0.80 | ±0.10 | 2.50 | ±0.10 | 0.15 | ★ |
| 8.2 | +0.1~+0.4 | 330/360/415 | 1.00 | ±0.15 | 2.60 | ±0.10 | 0.15 | ★ |
| 9.2 | +0.1~+0.4 | 330 | 1.00 | ±0.15 | 2.60 | ±0.10 | 0.20 | ★ |
| 10.2 | +0.1~+0.4 | 330/360/415 | 1.00 | ±0.15 | 2.60 | ±0.10 | 0.28 | ★ |
| 10.2 | +0.1~+0.4 | 330 | 1.00 | ±0.15 | 3.50 | ±0.10 | 0.28 | ★ |
| 11.2 | +0.1~+0.4 | 330 | 1.20 | ±0.15 | 3.35 | ±0.15 | 0.28 | ★ |
| 12.2 | +0.1~+0.4 | 330/360/415 | 1.20 | ±0.15 | 3.35 | ±0.15 | 0.34 | ★ |
| 13.2 | +0.2~+0.5 | 330 | 1.20 | ±0.15 | 3.35 | ±0.15 | 0.37 | ★ |
| 14.2 | +0.2~+0.5 | 330/360/415 | 1.50 | ±0.20 | 4.80 | ±0.20 | 0.40 | ★ |
| 15.2 | +0.2~+0.5 | 330 | 1.50 | ±0.20 | 4.80 | ±0.20 | 0.40 | ★ |
| 16.2 | +0.2~+0.6 | 330/360/415 | 1.50 | ±0.20 | 4.80 | ±0.20 | 0.47 | ★ |
| 16.2 | +0.2~+0.6 | 330 | 1.80 | ±0.20 | 5.50 | ±0.20 | 0.47 | ★ |
| 17.2 | +0.2~+0.6 | 330 | 2.00 | ±0.20 | 6.00 | ±0.20 | 0.47 | ★ |
| 18.2 | +0.2~+0.6 | 330/360/415 | 2.00 | ±0.20 | 6.00 | ±0.20 | 0.50 | ★ |
| 19.2 | +0.2~+0.6 | 330 | 2.00 | ±0.20 | 6.00 | ±0.20 | 0.50 | ★ |
| 20.2 | +0.3~+0.8 | 330/360/415 | 2.00 | ±0.20 | 6.20 | ±0.20 | 0.50 | ★ |
| 21.2 | +0.3~+0.8 | 330 | 2.00 | ±0.20 | 6.20 | ±0.20 | 0.50 | ★ |
| 22.2 | +0.3~+0.8 | 330/360/415 | 2.00 | ±0.20 | 6.20 | ±0.20 | 0.50 | ★ |
| 23.2 | +0.3~+0.8 | 330 | 2.00 | ±0.20 | 7.30 | ±0.20 | 0.50 | ★ |
| 24.2 | +0.3~+0.8 | 330 | 2.00 | ±0.20 | 7.30 | ±0.20 | 0.50 | ★ |
| 25.2 | +0.3~+0.8 | 330/360/415 | 2.00 | ±0.20 | 7.30 | ±0.20 | 0.50 | ★ |
| 25.2 | +0.3~+0.8 | 330 | 2.50 | ±0.20 | 10.00 | ±0.20 | 0.50 | ★ |
| 26.2 | +0.3~+0.8 | 330/360 | 2.00 | ±0.20 | 7.30 | ±0.20 | 0.50 | ★ |
| 28.2 | +0.3~+0.8 | 330/360 | 2.50 | ±0.20 | 8.80 | ±0.20 | 0.50 | ★ |
| 30.2 | +0.3~+0.8 | 330/360 | 2.50 | ±0.20 | 8.80 | ±0.20 | 0.50 | ★ |
| 32.2 | +0.3~+0.8 | 330/360 | 2.50 | ±0.20 | 8.80 | ±0.20 | 0.50 | ★ |
| Length L (mm) | Tolerance (mm) |
|---|---|
| <150 | +0.5/+1.0 |
| 150≤L≤300 | +1.0/+2.0 |
| >300 | +2.0/+5.0 |
Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.
For cutting-tool blanks where the designer specifies smaller coolant passages or a distinct web/channel relationship.
This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.
For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:
Non-standard requests are subject to technical review and manufacturing feasibility confirmation.
Provide the required hole diameter, TK, eccentricity, D, L, tolerances and a dimensioned cross-section.
Please also include:
Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.
Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.