Twin Straight Coolant-Hole Rods

Straight Coolant-Hole Rods

Twin Straight Coolant-Hole Rods

A carbide rod blank with two parallel straight coolant passages arranged symmetrically or to the specified cross-section.

Product Overview

A carbide rod blank with two parallel straight coolant passages arranged symmetrically or to the specified cross-section.

Configuration & Design Characteristics

For two-channel through-coolant tool designs. The hole spacing and position must be coordinated with the tool flute and web geometry.

For this configuration, the coolant-hole geometry is a functional part of the blank design. Confirm the hole count, hole diameter d, hole tolerance, hole center position, eccentricity es and TK where two holes are present. The cross-section must match the tool drawing.

Technical Specifications

The 2026 KENIN catalog provides the following specification fields for this product:

Blank D, D tolerance, L, hole diameter d, d tolerance, hole-center circle diameter TK, TK tolerance and eccentricity es. Catalog tables define size-specific combinations; do not assume one TK or hole size applies across the range.

Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.

★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.

Twin Straight Coolant-Hole Rods — Twin-hole dimensions · 2026 catalog
Blank DD tol.L (mm)Hole dd tol.TKTK tol.Offset esStock
4.2+0.1~+0.33300.80±0.101.73±0.070.10★
6.2+0.1~+0.3330/360/4151.00±0.153.00±0.100.15★
7.2+0.1~+0.33301.00±0.153.50±0.100.15★
8.2+0.1~+0.4330/360/4151.00±0.153.80±0.200.15★
9.2+0.1~+0.43301.40±0.154.00±0.200.20★
10.2+0.1~+0.4330/360/4151.40±0.154.80±0.200.28★
11.2+0.1~+0.43301.40±0.154.80±0.200.28★
12.2+0.1~+0.4330/360/4151.75±0.205.85±0.150.34★
13.2+0.2~+0.53301.75±0.205.85±0.150.37★
14.2+0.2~+0.5330/360/4151.75±0.206.80±0.200.40★
15.2+0.2~+0.53302.00±0.206.85±0.150.40★
16.2+0.2~+0.6330/360/4152.00±0.207.80±0.200.47★
17.2+0.2~+0.63302.00±0.207.85±0.150.47★
18.2+0.2~+0.6330/360/4152.00±0.208.85±0.150.50★
19.2+0.2~+0.63302.00±0.208.85±0.150.50★
20.2+0.3~+0.8330/360/4152.50±0.209.80±0.200.50★
21.2+0.3~+0.83302.50±0.209.80±0.200.50★
22.2+0.3~+0.8330/360/4152.50±0.2010.80±0.200.50★
23.2+0.3~+0.83302.50±0.2010.80±0.200.50★
24.2+0.3~+0.83303.00±0.2511.75±0.250.50★
25.2+0.3~+0.8330/360/4153.00±0.2511.75±0.250.50★
26.2+0.3~+0.8330/3603.00±0.2512.75±0.250.50★
28.2+0.3~+0.8330/3603.00±0.2513.75±0.250.50★
30.2+0.3~+0.8330/3603.00±0.2513.75±0.250.50★
32.2+0.3~+0.8330/3603.00±0.2513.75±0.250.50★
34.2+0.3~+0.8330/3603.00±0.2513.75±0.250.50★
Twin Straight Coolant-Hole Rods — Length tolerance — twin straight holes · 2026 catalog
Length L (mm)Tolerance (mm)
<150+0.5/+1.0
150≤L≤300+1.0/+2.0
>300+2.0/+5.0

Material Grade Selection

Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.

KENIN Carbide Grades

Typical Applications

For two-channel through-coolant tool designs. The hole spacing and position must be coordinated with the tool flute and web geometry.

This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.

Customization & Drawing Review

For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:

  • Outside diameter and length.
  • Hole count, diameter, position and spacing.
  • Helix angle and pitch, where applicable.
  • Chamfer, taper, slot, groove or stepped profile.
  • Ground or unground supply condition.
  • Required tolerances and inspection method.

Non-standard requests are subject to technical review and manufacturing feasibility confirmation.

Information Required for Quotation

Provide cross-section drawing, D, L, d, TK, eccentricity, tolerances, grade/application and quantity.

Please also include:

  1. Quantity per size.
  2. Required delivery destination.
  3. Any drawing revision or inspection specification.

Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.

Related Resources

Frequently Asked Questions

What are twin straight coolant-hole rods?
A carbide rod blank with two parallel straight coolant passages arranged symmetrically or to the specified cross-section.
What does TK describe for twin straight holes?
TK is the diameter of the circle through the coolant-hole centers. Specify it with hole diameter and eccentricity so the cross-section can be reviewed.
What should I include when ordering twin straight coolant-hole rods?
Provide cross-section drawing, D, L, d, TK, eccentricity, tolerances, grade/application and quantity. Include supply condition, surface requirements and the desired delivery date.
Can the twin straight coolant-hole rods configuration be customized?
Submit the selected catalog reference and a dimensioned drawing. TK is the diameter of the circle through the coolant-hole centers. Feasibility, grade and finishing must be confirmed for your request.
Does the catalog confirm current availability of twin straight coolant-hole rods?
The catalog describes this configuration, not live inventory. Confirm the selected size, quantity and delivery requirement in the quotation; retain any size-specific supply classification.

Request a Quote for Twin Straight Coolant-Hole Rods

Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.

Request a Quote Send Your Drawing