Tapered, Preformed & Stepped Rods
Ground Tapered Solid Rods
Ground solid carbide rods with a tapered end and specified chamfer geometry.
View Details
Tapered, Preformed & Stepped Rods
Tapered ground carbide blanks combining helical coolant geometry and external oil-groove features.
Tapered ground carbide blanks combining helical coolant geometry and external oil-groove features.
For special cutting-tool designs requiring a tapered profile, internal helical passages and external grooves. This is a geometry-specific configuration, not a general-purpose rod.
This shaped configuration is drawing-dependent. Confirm the main diameter, overall length, profile transitions, taper, groove or step dimensions, chamfer and all critical tolerances on a dimensioned drawing. Catalog illustrations show profile families and are not a substitute for a controlled drawing.
The 2026 KENIN catalog provides the following specification fields for this product:
Ground D, D tolerance, L, length tolerance, groove width B, groove depth T, chamfer angle and C, taper angle, coolant-hole d, TK, pitch P and pitch limits, eccentricity es. Catalog table lists h5 ground diameter and made-to-order classification; verify each row and drawing.
Do not transfer a dimension or tolerance from another product family. Where the catalog lists multiple configurations under the same nominal diameter, select the exact row matching the required hole, pitch, length or profile.
★ Standard stock · ● Made to order. These are catalog supply classifications, not live inventory. Confirm availability and lead time with your quotation. Original units and tolerance notation are retained.
Catalog supply classification: made to order for this product series. Confirm the selected drawing, availability and lead time in the quotation. The D 18.0 / L 123 taper-angle entry omits a degree symbol in the source; confirm the drawing before use as an inspection criterion.
| Ground D | D tol. | L | L tol. | Groove B | Depth T | Chamfer angle | Chamfer C | Taper angle | Hole d | TK | Pitch P | P lower | P upper | Offset es |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6.0 | h5 | 66 | +0~+0.5 | 1.5±0.2 | 0.9(0.0~+0.4) | 45°±3° | 0.5±0.1 | 140°(0°~+2°) | 0.70 | 2.40 | 32.65 | -0.65 | +0.67 | 0.15 |
| 6.0 | h5 | 82 | +0~+0.5 | 1.5±0.2 | 0.9(0.0~+0.4) | 45°±3° | 0.5±0.1 | 140°(0°~+2°) | 0.70 | 2.40 | 32.65 | -0.65 | +0.67 | 0.15 |
| 8.0 | h5 | 79 | +0~+0.5 | 2.0±0.2 | 1.4(0.0~+0.4) | 45°±3° | 0.6±0.1 | 140°(0°~+2°) | 1.00 | 3.80 | 43.53 | -0.86 | +0.89 | 0.15 |
| 8.0 | h5 | 91 | +0~+0.5 | 2.0±0.2 | 1.4(0.0~+0.4) | 45°±3° | 0.6±0.1 | 140°(0°~+2°) | 1.00 | 3.80 | 43.53 | -0.86 | +0.89 | 0.15 |
| 10.0 | h5 | 89 | +0~+0.5 | 2.5±0.2 | 1.65(0.0~+0.4) | 45°±3° | 0.6±0.1 | 140°(0°~+2°) | 1.40 | 4.50 | 54.41 | -1.08 | +1.11 | 0.20 |
| 10.0 | h5 | 103 | +0~+0.5 | 2.5±0.2 | 1.65(0.0~+0.4) | 45°±3° | 0.6±0.1 | 140°(0°~+2°) | 1.40 | 4.50 | 54.41 | -1.08 | +1.11 | 0.20 |
| 12.0 | h5 | 102 | +0~+0.5 | 2.5±0.2 | 1.75(0.0~+0.4) | 45°±3° | 0.8±0.1 | 140°(0°~+2°) | 1.40 | 5.85 | 65.30 | -1.30 | +1.34 | 0.30 |
| 12.0 | h5 | 107 | +0~+0.5 | 2.5±0.2 | 1.75(0.0~+0.4) | 45°±3° | 0.8±0.1 | 140°(0°~+2°) | 1.40 | 5.85 | 65.30 | -1.30 | +1.34 | 0.30 |
| 14.0 | h5 | 118 | +0~+0.5 | 3.0±0.2 | 2.15(0.0~+0.4) | 45°±3° | 0.8±0.1 | 140°(0°~+2°) | 1.75 | 6.70 | 76.18 | -1.51 | +1.56 | 0.37 |
| 14.0 | h5 | 124 | +0~+0.5 | 3.0±0.2 | 2.15(0.0~+0.4) | 45°±3° | 0.8±0.1 | 140°(0°~+2°) | 1.75 | 6.70 | 76.18 | -1.51 | +1.56 | 0.37 |
| 16.0 | h5 | 115 | +0~+0.5 | 3.0±0.2 | 2.3(0.0~+0.4) | 45°±3° | 0.8±0.1 | 140°(0°~+2°) | 1.75 | 7.90 | 87.06 | -1.73 | +1.78 | 0.40 |
| 16.0 | h5 | 133 | +0~+0.5 | 3.0±0.2 | 2.3(0.0~+0.4) | 45°±3° | 0.8±0.1 | 140°(0°~+2°) | 1.75 | 7.90 | 87.06 | -1.73 | +1.78 | 0.40 |
| 18.0 | h5 | 123 | +0~+0.5 | 3.5±0.2 | 2.5(0.0~+0.4) | 45°±3° | 0.8±0.1 | 140(0°~+2°) | 2.00 | 9.15 | 97.95 | -1.94 | +2.00 | 0.50 |
| 18.0 | h5 | 143 | +0~+0.5 | 3.5±0.2 | 2.5(0.0~+0.4) | 45°±3° | 0.8±0.1 | 140°(0°~+2°) | 2.00 | 9.15 | 97.95 | -1.94 | +2.00 | 0.50 |
| 20.0 | h5 | 131 | +0~+0.5 | 3.5±0.2 | 2.7(0.0~+0.4) | 45°±3° | 1.0±0.1 | 140°(0°~+2°) | 2.00 | 9.90 | 108.83 | -2.16 | +2.23 | 0.50 |
| 20.0 | h5 | 153 | +0~+0.5 | 3.5±0.2 | 2.7(0.0~+0.4) | 45°±3° | 1.0±0.1 | 140°(0°~+2°) | 2.00 | 9.90 | 108.83 | -2.16 | +2.23 | 0.50 |
Technical confirmation required: some taper-angle entries omit a degree symbol. The solid-rod finishing note states h5 while the table lists h5/h6. Original entries are retained; do not use unresolved entries as final inspection criteria.
Select the grade for the intended tool, workpiece material and cutting operation. KENIN reviews grade suitability and availability for the requested rod geometry; grade names do not establish equivalence.
For special cutting-tool designs requiring a tapered profile, internal helical passages and external grooves. This is a geometry-specific configuration, not a general-purpose rod.
This page describes the blank configuration, not a guaranteed finished-tool performance result. Final tool life and machining performance depend on tool geometry, coating, machine conditions, workpiece and cutting parameters.
For requirements outside the listed catalog configuration, send a dimensioned drawing. Depending on the geometry and confirmed manufacturing scope, the review may cover:
Non-standard requests are subject to technical review and manufacturing feasibility confirmation.
Provide full axial profile and cross-section drawing, groove width/depth, D, L, d, TK, pitch, taper and chamfer details.
Please also include:
Also state the required supply condition, surface requirements, desired delivery date and inspection method or acceptance specification. Delivery and feasibility are confirmed with the quotation.
Send KENIN the product reference, dimensions, tolerance requirements, grade or application details and quantity. A dimensioned drawing helps the team review the exact configuration.